All Shield EX

All Shield EX is an oil and stain resistant penetrating concrete and stone protectant for interior and exterior surfaces

All Shield WB is a low-VOC, waterborne, synthetic-modified silane-siloxane concrete protectant designed to provide long-lasting protection against water intrusion, oil contamination, food stains, moisture damage, and deicing salts. This penetrating sealer bonds directly with concrete and stone surfaces while maintaining breathability, helping preserve the appearance and durability of the substrate.

Unlike film-forming coatings, All Shield WB penetrates below the surface to create invisible protection without changing the natural appearance of concrete, brick, pavers, or stone. The result is a colorless, non-yellowing, skid-resistant finish suitable for both interior and exterior applications.

Key Features & Benefits

Superior Oil & Stain Resistance

Provides excellent protection against:

• Motor oil
• Food stains
• Grease
• Water intrusion
• Common liquid contaminants

This makes All Shield WB ideal for commercial, industrial, and high-traffic environments.

Water-Based Low VOC Formula

The environmentally conscious formula complies with:

• SCAQMD regulations
• OTC regulations
• LADCO requirements

Making it suitable for projects requiring low-VOC products.

Freeze-Thaw Protection

Reduces water penetration into concrete, helping minimize:

• Freeze-thaw damage
• Surface scaling
• Spalling
• Weather-related deterioration

Especially beneficial for parking structures, bridges, sidewalks, and exposed concrete surfaces.

Breathable Penetrating Formula

Allows trapped moisture vapor to escape while preventing liquid penetration from above. This helps maintain concrete integrity while reducing moisture-related damage.

Non-Yellowing Finish

Leaves behind a clear, invisible protective barrier without discoloring decorative concrete, stone, pavers, or masonry surfaces.

USDA Accepted

Approved for indirect food contact areas, making it suitable for food-processing and commercial facilities.

Common Applications

Commercial & Industrial Floors

Protects concrete floors exposed to:

• Oils
• Grease
• Vehicle traffic
• Chemical contamination

Automotive Service Facilities

Ideal for garages, maintenance facilities, repair shops, and service bays where oil and fluid exposure is common.

Driveways & Pavements

Helps prevent water penetration, staining, and weathering damage while preserving appearance.

Parking Structures

Protects parking decks and garages from deicing salts, moisture intrusion, and long-term deterioration.

Bridges & Marine Structures

Provides additional protection against harsh environmental conditions, salt exposure, and moisture attack.

Natural & Manufactured Stone

Suitable for natural stone, synthetic stone, brick, concrete pavers, and decorative concrete applications.

Recommended Surfaces

All Shield WB can be used on:

• Concrete floors
• Decorative concrete
• Concrete pavers
• Brick
• Natural stone
• Manufactured stone
• Driveways
• Sidewalks
• Parking structures
• Bridges
• Marine platforms

Application Instructions

Surface Preparation

For best results:

• Surface must be clean and dry.
• Remove dirt, oil, grease, curing residue, and contaminants.
• Existing sealers must be removed.
• Surface must be absorptive to allow penetration.

For older concrete, pressure washing and cleaning with products such as Orange Peel or Berry Clean may be necessary.

New Concrete Requirements

• Allow a minimum curing period of 21 days.
• Ensure concrete is dry and free of curing residue.
• Test a small area before full application.

Application Equipment

Apply using:

• Low-pressure sprayer (10–20 PSI)
• Roller
• Brush
• Broom
• Microfiber applicator for dense surfaces

Application Method

• Apply generously and evenly.
• Avoid puddling or standing material.
• Highly porous surfaces may require additional wet-on-wet coats.
• Do not allow excess material to dry on the surface.

Coverage Rates

Coverage varies based on substrate porosity: