Tempo Communications
Tracker 2 Cable Locator 501
With its inductive signal detection; the TEMPO Communications Tracker II can be used on active or dead systems. Now you can trace the path and determine the depth of buried wires; cables; and metallic pipes or conduit and find the ends of a cut cable without having to deactivate the systems.
FEATURES:
- Trace the path and determine the depth of buried conductors.
- Use on active or dead systems.
- Transmitter output and receiver sensitivity are both fully adjustable for maximum accuracy.
- The lightweight receiver provides both audible and visual indications of signal strength for accurate identification.
- The transmitter offers three methods of connection: direct; inductive coupler; or inductive antenna.
- Inductive coupler clamps around the wire or pipe for use on active lines; or where isolating the line is not an option.
- Inductive antenna is built into the case housing and allows the transmitter to be placed on the ground over the wire path to radiate a signal down onto the conductor.
- Traces over distances to 4;000 feet (1.2 km) and depths to 7 feet (2.2 m).
- Adjustable sensitivity and transmitter power.
- Battery-operated (8 – AA and 1 – 9V NOT included).
SPECIFICATIONS:
| Automatic Shut Off | 90 MINT Transmitter And Receiver |
|---|---|
| Battery Life | Transmitter – 30 HR Nominal |
| Receiver – 10 HR Nominal | |
| Construction | Transmitter/Receiver-Powder Coated Aluminum |
| Case-Vacuum Formed Polyethylene | |
| Dimensions | 33.50″ X 8.250″ X 3.750″ |
| Power Requirement | Transmitter – (8) AA batteries |
| Receiver – (1) 9V battery | |
| Transmitter Frequency | 447.5 KHZ |
| Transmitter Power | 40 Vp-p (140 MILW) Maximum |
| Voltage Protection | 240 VAC/500 VDC |
INCLUDES:
- (1) Transmitter assembly
- (1) Receiver assembly
- (1) Inductive coupler (clamp)
- (10 Inductive antenna (built-in)
- (1) Durable polyethylene case
- (2) 8 foot (2.4 m) test leads with heavy-duty alligator clips
“