MetalPro 45-Ton Ironworker w/ 8″ Shear Kit, 8″ Brake Kit, 5pc Round Punch Kit BNDL-MP4500FS-S8-B8-P5

METALpro’s MP4500FS ironworker delivers 45 tons of punching force and 22.5 tons at the central station. Like the larger MP5000FS, it runs on a standard 110/120 V outlet and uses foot‑switch controlled hydraulics for precise hands‑free operation. A built‑in 8 in. 3‑in‑1 shear cuts flat bar, angle and rod stock while the forming station handles material up to 1/2 in. thick. The machine is made in the USA and backed by a 3‑year limited warranty. This bundle pairs the ironworker with an 8 in. shear shelf extension and back stop for repeatable cuts, a 5‑piece round punch kit with guide table and slug catcher and an 8 in. brake kit with guide and back stop, giving you everything needed for punching, shearing and forming operations.

Features & Benefits

• 45‑ton ironworker with 45 tons at the punch station and 22.5 tons at the central workstation; powered by 110/120 V single‑phase electricity and controlled via foot‑switch
• 8 in. 3‑in‑1 shear cuts flat bar up to 1/2 in., angle up to 1/4 × 4 × 4 in. and round rod up to 3/4 in
• Forming station handles material up to 1/2 in. thick with 25 tons of forming capacity
• USA‑made with a 3‑year limited warranty
• 8 in. shear shelf extension adds a stable work surface with adjustable L‑brackets for repeatable cuts
• Shear back stop (MPSBS) adjusts up to 48 in. and includes a mounting bracket, adjustable rod and stop for consistent length cuts
• 5‑piece round punch kit expands your punching capacity with sizes 1/4 in., 3/8 in., 1/2 in., 5/8 in. and 3/4 in.
• Guide table (MP45PSP) bolts to the punch station and includes adjustable L‑brackets for accurate, repeatable punching
• Slug catcher (MPSC) mounts beneath the punch station to capture slugs and keep the workspace clean
• 8 in. brake (MP4110) fits any METALpro ironworker and includes a standard 90° die set; forms materials from 28 ga to 1/2 in. mild steel
• Brake guide (MP8BG) attaches to the 8 in. brake and provides adjustable L‑brackets for square bends and stops
• Brake back stop (MPBBS) features a slotted T‑channel and micro‑adjustable stop for consistent bends up to 19 in.

Specifications

• Punch capacity: 7/8 in. round hole through 1/2 in. mild steel
• Forming tonnage: 25 tons; forming capacity up to 1/2 in. thick
• Shear capacity: 1/2 in. flat bar, 1/4 × 4 × 4 in. angle, 3/4 in. round rod
• Power: 110/120 V single‑phase; foot‑switch controlled hydraulics
• Dimensions: 24 × 36.5 × 59 in.; weight: 575 lb

Downloads

• Operator’s Manual