- JET
- J-A5818 15″ Variable Speed Floor Model Drill Press 230/460V 354551
- These JET Drill Presses use a variable-speed motor with the stepped-pulley system; and come equipped with a continuously variable transmission. This enables use at a wide range of speeds; as well as the ability to change speed during operation. A scale-marked hand wheel that matches the desired machine speed is mounted to a reduction gearing system for precise operator control. This adjusts the gearing ratio between the motor’s fixed pulley and the output shaft’s variable pulley; changing the speed of the chuck. A tensioner pulley is implemented in the belt transmission to take up or release the slack in the belt as the speed changes.
- Full bearing support on quill for maximum spindle stiffness
- Handwheel speed adjustment of 400 to 5;000 RPM
- Large 2-1/4″ quill for greater accuracy
- 3″ column diameter for maximum head support
- 6″ stroke for deep hole application
- Accurate depth stop for precice hole depths
- 1/2″ drill chuck and arbor included
- Safety collar
- Style (Type): Variable
- Drills to Center of Circle (in): 15
- Drilling Capacity Cast Iron (In.): 5/8
- Drilling Capacity Mild Steel (In.): 1/2
- Distance Column to Spindle (In.): 7-1/2
- Number of Spindle Speeds: Variable
- Range of Spindle Speeds (RPM): 400 – 5;000
- Column Diameter (In.): 3
- Spindle Taper (In. x TPI): MT-2
- Spindle Travel (In.): 6
- Spindle Distance to Base (In.): 44-1/2
- Spindle Distance to Table (Max.) (In.): 25-3/4
- Table Size (L x W) (In.): 15 x 18
- Table Travel (In.): 16-3/4
- T-Slots Number and Size (In.): 2 and 1/2
- T-Slot Centers (In.): 5-5/16
- Work Table Weight Capacity (Lbs.): 90
- Base Dimensions (In.): 20-7/16 x 14-3/16
- Base Work Table (In.): 12-1/8 x 11-13/16
- Base Slots Number & Size (In.): 2 and 1/2
- Motor (HP): 1 HP; 230/460V; 3Ph
- Overall Dimensions (L x W x H) (In.): 30 x 20 x 71
- Weight (Lbs.): 426
“
