FallTech
SteelGrip Cable HLL System 60310024
FEATURES:
- Pre-configured in 30 and 60 single-span and 80 and 100 multi-span systems
- Single-span systems include one Coil Energy Absorber and two Stanchions while Multi-span systems
- 42 Plated Steel I-Beam Stanchions fit beam flanges up to 2 thick
- Plated Steel I-Beam Clamps available with flange width ranges of 4 to 12; 4 to 18 and 4 to 24 and include Steel Wing Nut adjusters see Table for specific system length and clamp configurations with Stanchion and Energy Absorber content
All SteelGrip Cable HLL Systems include:
- SteelGrip Stainless Steel Coil Energy Absorber (1 or 2 as needed)
- SteelGrip I-Beam Stanchions (2 or 3 as needed)
- Intermediate Pass-through Bracket (for multi-span systems only)
- 21 Galvanized steel jaw and jaw Tensioning Turnbuckle with 12 adjustment
- 2 Alloy Steel Carabiners and Wire Rope Clips (plus Steel Shackle for systems greater than 60)
- 3/8 Galvanized Steel Cable with thimble-eye termination
SPECIFICATIONS:
| Cable Lifeline: | 3/8 Galvanized Steel 7×19 | 5;000 lbs Min Static Strength |
| I-Beam Stanchion: | Plated Steel Post; Base andClamp | 8;000 lbs Min Static Strength |
| Carabiner: | Plated Alloy Steel | 5;000 lbs Min Statc Strengthwith 3;600 lbs Gate Strength |
| Turnbuckle: | Galvanized Steel |
not rated individually |
| Shackle: | Galvanized Steel | |
| Coil Energy Absorber: | Stainless Steel |
| System | Clamp Capacity |
Working Length |
Stanchions | Energy Absorbers |
|---|---|---|---|---|
| 6033012 | 12 | 30 | 2 | 1 |
| 6036012 | 12 | 60 | 2 | 1 |
| 6038012 | 12 | 80 | 3 | 2 |
| 60310012 | 12 | 100 | 3 | 2 |
| 6033018 | 18 | 30 | 2 | 1 |
| 6036018 | 18 | 60 | 2 | 1 |
| 6038018 | 18 | 80 | 3 | 2 |
| 60310018 | 18 | 100 | 3 | 2 |
| 6033024 | 24 | 30 | 2 | 1 |
| 6036024 | 24 | 60 | 2 | 1 |
| 6038024 | 24 | 80 | 3 | 2 |
| 60310024 | 24 | 100 | 3 | 2 |
System Performance Specifications
- Static Strength: 5;000 lbs. Minimum
- OSHA User Capacity: 310 lbs. Max. per User
- 2 Users Max per Single Span; 6 Users Max per Multi-span System
Relevant Standards
- OSHA: 1926.502 and 1910.14
“
