Enerpac
10′ Thermo-Plastic High Pressure Hydraulic Hose HC7210
This Enerpac HC7210 hydraulic hose is for use with high-pressure applications such as hydraulic jacks and has a maximum working pressure of 10;000 (pounds per square inch) psi. It is 10′ in length; with a polyurethane outer jacket for resistance to abrasion and two layers of steel wire braids for strength and resistance to expansion.
FEATURES:
- Crimped-on rubber strain relief for improved life and durability on all models.
- For demanding applications; featuring a 4:1 design factor.
- Maximum working pressure of 10;000 psi.
- Two layers of steel wire braids.
- Outside jacket is polyurethane; to provide maximum abrasion resistance.
- Exhibits low volumetric expansion under pressure to enhance overall system efficiency.
SPECIFICATIONS:
| Maximum Operating Pressure (psi) | 10;000 |
|---|---|
| Internal Diameter (in) | 0.25 |
| End One Coupler | 3/8 NPTF |
| End Two Coupler | CH604 |
| Oil Capacity (in3) | 5.89 |
| Hose Oil Capacity (in3) | When using long hose lengths; it is sometimes necessary to fill the pump reservoir after filling the hoses. To determine the hose oil capacity; use the following for .25″ internal diameter hoses: Capacity (in3) = .5892 x Length (ft) |
| Length | 10 |
“
